-
What are the characteristics of ETFE anticorrosive coating sprayed on agitator
The agitator is sprayed with ETFE (ethylene tetrafluoroethylene copolymer) anti-corrosion coating, which has the following characteristics: 1. good corrosion resistance Strong acid and strong alkali environment: ETFE coating has good resistance to strong acid and strong alkali such as sulfuric acid, hydrochloric acid, nitric acid, sodium hydroxide, etc., can maintain stability in these co
Learn more -
What is spraying ECTFE for pharmaceutical three in one equipment
Spraying ECTFE on pharmaceutical three in one equipment is a surface coating technology, as follows: 1. Material properties of ECTFE: ECTFE is an ethylene chlorotrifluoroethylene copolymer, which is copolymerized with chlorofluoroethylene and trifluoroethylene. It has excellent chemical stability, can resist the erosion of strong acid, alkali, organic solvent and other chemical substances, and al
Learn more -
What are the applications of PTFE lining for chemical reaction vessels
The PTFE plate (polytetrafluoroethylene plate) lining of chemical reaction vessels has various applications in chemical reaction vessels due to its excellent chemical stability, high temperature resistance, low friction coefficient and other characteristics. The following are some main aspects: 1. Corrosion resistance protection Strong acid-base medium reaction: In chemical reactions involv
Learn more -
What's insulation capacity of ETFE anti corrosion coating sprayed on the head
The insulation performance of ETFE anti-corrosion coating sprayed on the head is very good, which is reflected in the following aspects: 1. High volume resistivity: At temperatures close to room temperature, ETFE has a volume resistivity of up to 1017 Ω· cm, which can meet general insulation requirements even under high temperature conditions. This means that it is difficult for current to pass t
Learn more -
What are the main uses of semiconductor duct spraying ECTFE
Semiconductor duct spraying ECTFE has the following main uses: 1. Corrosion prevention: During the semiconductor manufacturing process, a large amount of corrosive chemicals are used, such as strong acids such as sulfuric acid, hydrofluoric acid, nitric acid, as well as strong bases such as sodium hydroxide and potassium hydroxide. ECTFE has good chemical resistance, which can resist the erosion
Learn more -
What are the purposes of spraying PFA coating on chemical equipment
PFA (Fusible Polytetrafluoroethylene) is a high-performance fluorinated plastic. Spraying PFA coating on chemical equipment has multiple uses, as follows: 1. Corrosion prevention: Chemical production often comes into contact with various highly corrosive chemicals, such as sulfuric acid, hydrochloric acid, nitric acid, sodium hydroxide and other acid-base solutions. PFA coating has good chemical
Learn more -
What are characteristics of vibrating screen frame sprayed with carbon tungsten
The vibrating screen frame sprayed with tungsten carbide has multiple characteristics, mainly reflected in high hardness and wear resistance, good corrosion resistance, thermal stability, etc. The following is a detailed introduction: 1. High hardness and wear resistance High hardness: Tungsten carbide itself has a high hardness, with a Mohs hardness of 9-9.5, second only to diamond. Spray
Learn more -
What are the precautions for spraying ECTFE on lithium battery equipment
When spraying ECTFE (ethylene trifluorochloroethylene copolymer) on lithium battery equipment, there are many key points to pay attention to, including surface treatment, spraying environment, material selection, etc. The following is a specific introduction: 1. Surface treatment Cleaning: The surface of the parts to be sprayed on lithium battery equipment must be cleaned to remove impuriti
Learn more -
What is the main purpose of powder mixer spraying tungsten carbide
Powder mixer sprayed with tungsten carbide is mainly used to improve the wear resistance, corrosion resistance and other properties of the powder mixer, to adapt to various harsh working environments, ensure stable and efficient operation of the mixer, and extend its service life. Its specific uses are as follows:
Learn more -
What are the advantages of spiral shaft is sprayed with alumina coating
Spiral shaft is sprayed with alumina coating has multiple advantages: 1. Good wear resistance Aluminum oxide has a relatively high hardness, with a Mohs hardness of up to 9. After forming a coating on the surface of the spiral shaft, it can reduce the wear and tear of the shaft itself in the face of long-term friction and compression of the material. For example, in the scenario of ore cru
Learn more
Add wechat
Contact us
Telephone consultation